Concrete plays a major role in the construction industry. Natural sand is a prime material used for the preparation of concrete and also plays an important role in Mix Design. Now a day's river erosion and other environmental issues have led to the scarcity of river sand. The reduction in the sources of natural sand and the requirement for reduction in the cost of concrete production has ...

Partial Replacement of Sand with Quarry Dust in Concrete. -The reduction in the sources of natural sand and the requirement for reduction in the cost of concrete production has resulted in the increased need to identify substitute material to sand as fine aggregates in the production of concretes especially in Concrete.

Jan 15, 2014 The maximum improvement in steel-concrete bond strength is recorded with 10.0% marble dust as a replacement for cement or as a replacement for sand. 12. The use of marble dust up to 15.0% by weight as a replacement for cement or as a replacement for sand has insignificant effect on the ultrasonic pulse velocity test values.

Cost of concrete is reduced by using the marble dust, also the economic [36] and ecocofficient polymer is obtained by using dust instead of cement or sand. It was concluded that the production of ...

Nov 22, 2019 This paper report the experimental study which investigated the influence of 100% replacement of sand with quarry dust. Samples of concrete (cubes and cylinders) for one mix, namely 1:1.02:2.22 were made using quarry dust and marble powder as fine aggregate in concrete. INTRODUCTION

Partial Replacement of Sand with Quarry Dust in Concrete. This present work is an attempt to use Quarry Dust as partial replacement for Sand in concrete. Attempts have been made to study the properties of concrete and...

Abstract: In the present study an investigation is made on properties of concrete by partial replacement of Cement with Ground Granulated Blast Furnace Slag (GGBS) and Fine Aggregate with Quarry Dust (QD). Ground Granulated Blast Furnace Slag is a by-product of Iron and Steel industry which is produced in large quantities as a solid waste.

Sep 01, 2016 The concrete mix made using granite powder (GP) and iron powder (IP) as partial replacement of sand showed good workability and fluidity similar to normal concrete mixes. 2. The compressive strength of concrete increased with the addition of granite powder (GP) as partial replacement of sand.

Sand 4 20% Sawdust + 80% 17.05 19.06 2.228 Sand 3 30% Sawdust + 70% 18.06 11.03 2.546 2 Sand 1 Table 5:- Compressive and Tensile strength of different combination of concrete at 28 days 0 0% Sawdust 10% 20% 30% + 100% Sawdust + Sawdust + Sawdust + 45 Sand 90% Sand 80% Sand 70% Sand 40 Mix Design with Replacement Compressive Strength (MPa) Fully ...

Partial Replacement of Sand with Quarry Dust in Concrete557 Кб. This present work is an attempt to use Quarry Dust as partial replacement for Sand in concrete.NEED FOR THE REPLACEMENT OF SAND I. INTRODUCTION Concrete is the most popular building material in the world.

(2018);have found an experimental study of concrete as a partial replacement of sand with query dust and steel powder. In This Study they had used samples casted with 10%, 20%, 30%, 40% & 50% replacement of fine aggregate using stone dust and steel powder tested at a different periods of curing 7 days, 14 days and 28 days .

Partial Replacement of Sand by Quarry Dust in Concrete Sumit L. Chauhan, Raju A.Bondre Assistant Professor P. I. G. C. E. Nagpur . Abstract- The paper describe the role of quarry dust In the construction of buildings and other structures to eliminate the demand of natural sand by using quarry waste to replace the use of natural sand.

material for partial replacement of sand in concrete for modifying its properties. In the concrete mixes sand was replaced at 5%, 10%, 15%, 20% and 25% by weight and effects of replacement on concrete is observed. Use of saw dust in concrete permits disposal of waste (saw dust) and make concrete …